Toa D-901 KR - Manual (Page 56)

56
• The following dialog is displayed if the PC and the connected D-901 mixer differ in memory contents:
• Set the transfer direction to "PC>>Unit" when transferring data from the PC to the D-901, and to "Unit>>PC"
when transferring from the D-901 to the PC. You can select different transfer directions for each memory.
• After ensuring correct selection, press the [Update] button. Data transfer is started.
Note
When transferring data from the PC to the D-901, this cannot be achieved if the module configuration does
not match between the two.
• To start communications with the PC, select [Remote → Connect...] from the menu.
• Valid connections are being searched while the following dialog is displayed:
Note
The "Current Memory No." on the
screen is a memory number being
currently recalled.