Settings when the d-936r is used, Settings when the d-937sp is used, Settings when the d-981, d-983, or d-984vc is used – Toa D-901 KR User Manual
Page 83: Preset memory settings
200412
20.3.5. Settings when the D-937SP is used
Setting Item
Setting Range
Line Sel
1, 2, 3, 4
20.3.4. Settings when the D-936R is used
Setting Item
Setting Range
Line Input Mode
MIX ALL, SELECT
Line Selection
1, 2, 3, 4 (factory-preset: all On)
20.3.6. Settings when the D-981, D-983, or D-984VC is used
20.3.7. Preset Memory Settings
[Preset memory crossfade time setting]
Setting Item
Setting Range
Crossfade Time
0 – 10 s, 0.5 s steps
Setting Item
Setting Range
Contact Input
Memory (factory-preset: 1 – 8), Volume Up/Down, Channel On/Off
Stereo input, None (factory-preset: 9 – 24)
Contact Output
Normally break (factory-preset: 9 – 24), Normally make,
Memory (factory-preset: 1 – 8), Channel On/Off,
Contact input status, Stereo input
[Initial preset memory settings]
Setting Item
Setting Range
Preset Memory
LAST MEMORY , 1 – 16