Toa D-901 KR - Manual (Page 43)

43
(6) Scale change button
If you press this button, a dialog is displayed, enabling you to
change the scale of the characteristics graphic chart.
(7) Table indication button
Displays the filter status display area in tabular form.
(8) Filter status indication area
Displays the responses of the current dynamic mode filters and auto mode filters. Each filter's setting value
is displayed in tabular form.
8.12. Microphone/Line Input Module View
(Available only when the D-921E or D-921F is used)
Click the "D-921" box displayed on the input slot in the Flow View. The Microphone/Line Input Module View is
then displayed.
(1)
(2)
(1) Phantom power ON/OFF button [Phantom Power]
Displays the ON/OFF setting status of the selected channel.
Press this button to turn on or off the phantom power. (Always set to OFF when LINE is selected with the
PAD button.)
(2) PAD button [PAD]
Displays the PAD settings of the selected channel. You can select the setting value from the pull-down
menu if you press this button.