Toa D-901 KR - Manual (Page 34)

34
8.7. Filter View (Filter Function Settings)
Click the Filter box of Multi-band Filter. The Filter View is then displayed.
(1) (2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(Displayed in tabular form)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(1)
(1) Filter control
(2) Filter point symbol
Select the filter point from the filter point symbol as required. If you right-click a point
on the filter point symbol, the popup menu shown at right is displayed.
Clicking any option other than "Through" causes a circle to appear on the filter
control section. To cancel it, right-click the filter point symbol again and select
"Through." The circle on the filter control section disappears. A yellow circle
indicates the selected filter point.
: Parametric equalizer (PEQ)
: High-pass filter (HPF)
: Low-pass filter (LPF)
: High shelving filter (High Shelving)
: Low shelving filter (Low Shelving)
: Horn equalizer (Horn EQ)
: Notch filter (Notch)
: All-pass filter (All Pass)
You can change the frequency and the gain if you drag the filter point on the filter control. When a white
circle is displayed on the left side of the filter point, by clicking and dragging the white circle up and down,
the Q value of the selected filter point can be changed.
(3) Filter type indication button
Indicates the type of filter of the selected filter point.
Press this button to select the type of filter from the pull-down menu.
Selecting "Through" causes the circle to disappear from the filter control section.