Toa D-901 KR - Manual (Page 17)

17
6. MEMORY VIEW
The memory view is located at the upper left of the main screen.
It shows the preset memory names, the crossfade time, and the preset memory numbers being currently
selected. It is possible to recall preset memories and also to write data into the preset memories.
Memory list
Change button Store button
• The preset memory being currently selected is highlighted in the memory list.
• To recall a preset memory, click the corresponding preset memory number and press the [Change] button.
The menu bar can also be used to recall (See p. 50 ).
• The [Change] button turns to the [Trash] button when the recalled preset memory data is edited. Pressing
the [Trash] button discards the data in edit and recalls the original data.
• To write data into the preset memory, click the corresponding preset memory number and press the [Store]
button. The menu bar can also be used to recall (See p. 50 ).
• To change a preset memory name or crossfade time, click on it with the corresponding preset memory in the
memory list highlighted by double-click. The preset memory name or crossfade time can also be changed
using the commands from the menu bar. (See
p. 51 )
A maximum of 20 characters can be used for entering a preset name.
Set the crossfade time for up to 10 seconds in 0.5-second units.
• You can switch the memory view between docking and floating displays*.
[Docking display]
Select [View
→ Memory View → Docking] from the menu.
[Floating display]
Select [View
→ Memory View → Floating] from the menu.
* Refer to p. 76 View Display Switching.
Crossfade time