SINGER 384.13012 (Sold at Sears) User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
• Inserting bobbin
rn Place a bobbin in the bobbin case making sure
thread feeds clockwise coming from the bobbin.
Draw the thread through the slot of case.
[sl Continue to draw the thread under the tension spring and
through the opening.
Pull out about 4” (10 cm) of thread.
|T1 Holding latch open, position the bobbin case into the
shuttle and release latch.
Case should lock into place when latch is released.