Rick-rack stretch, Overcast stretch stitching, Rick-rack stretch overcast stretch stitching – SINGER 384.13012 (Sold at Sears) User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Rick-rack Stretch
® Stitch selector:
C
(2) Stitch length:
Stretch stitch position
d) Needle thread tension: 1 to 4
© Presser foot:
Zigzag foot
Sew on stretch fabrics in any area that you might use a
zigzag stitch. This stitch is used as a decorative topstitch as
well.
Overcast Stretch Stitching
© Stitch selector:
E or F
(D Stitch length:
Stretch stitch position
(3) Needle thread tension: 1 to 4
@ Presser foot:
Zigzag foot
This stitch is for sewing a seam with an overcast finish. It is
used when making swim wear, ski pants and other
garments which require stretch.
• Starting to sew
Place raw edge of fabric to the " left ” of the needle as shown.
Sew in a manner so that the needle pierces the fabric very
close to the outside edge. Or place the fabric to allow a 5/8”
(1.6 cm) seam, then trim seam allowance.
Raw or worn edges of older garments can be overcasted to
prevent further raveling.
(
----------------
A
E
F
® ®
1
>1 PATTERN; E LENGTH: S.S.
(D
0
-
V_________
X
J
50