Doremi CineAsset - Manual (Page 39)

3.2.1.2.6 Default Filters Tab
The Default Filters tab can be used to apply filters to the composition when creating the project. Filters
can also be added to the composition using the Editor Interface.
• The available filters that can be set as default are Color Conversion, Overlay, Burn and
Lead/Trail.
Figure 43 : Default Filters Tab
3.2.1.3 Color Conversion
The color conversion filter is the most commonly used filter and often should be set as default when
using JPEG2000 Image compression.
 To enable color conversion, check the Color conversion check-box in the Default filters tab (see
Figure 43).
 Choose Conversion type (RGB to XYZ, XYZ to RGB or P3 to XYZ).
 Once color conversion is checked, there are 3 options (see Figure 44).
o Use default LUT – use the CineAsset default RGB to XYZ' LUT.
DCA.OM.000488.DRM Page 39 of 82 Version 2.5
Doremi Labs