Doremi CineAsset - Manual (Page 77)

4.4 CineInspect
4.4.1 Syntax
CineInspect.exe <command> [dcpFolderDir] [validation_level] start [outputfile]
4.4.2 Commands
 -show: Show the validation tool.
 -hide: Hide the validation tool.
4.4.3 Options
 dcpFolderDir:
o Is the destination folder of the DCP that you want to inspect
 validation_level
o 1=File Validation
o 2=Schema's Validation
o 3=Signature Encryption Validation
o 4=Compliance with DCI spec Validation
o 5=Compliance with Standard (SMPTE or Interop) spec Validation
 Start
o is optional and is only valid when command == show
o If not present, then show the gui and do not start the validation
o If present, then show the gui and start validation automatically
 Outputfile
o Is optional and is only valid when command == hide. It is the destination path file name.
o If not present, then hide the gui and output the log to the standard output window
o If present, then hide the gui and output the log to the specified output file
Note: Make sure when entering a location to include it in "" so spaces will be counted for.
DCA.OM.000488.DRM Page 77 of 82 Version 2.5
Doremi Labs