Doremi DSV-J2 - Manual (Page 20)

4.3.2 Keyboard & Mouse PS-2 Connectors
On the left side of the connector panel are the PS-2 connectors for the PC keyboard and
mouse. These jacks can be used interchangeably, but traditionally the purple jack is for a PC
keyboard and the green jack is for a PS-2 mouse. If you have a USB keyboard or mouse, then
use the USB ports on the right side of the motherboard connector panel. You may also use the
upper USB port on the front panel of the unit for connecting the keyboard and mouse.
4.3.3 Serial Port
This is a standard 9-pin male DB-9 serial COM port on the motherboard.
4.3.4 VGA
Connect a standard VGA monitor here for display of the DSV-J2 software interface.
This connector can also be linked to the center rear panel VGA connector to facilitate use of the
front panel LCD screen. The VGA cable provided with the DSV-J2 (Section 4.1) is then required.
4.3.5 USB Ports
Connect standard USB 2.0 peripherals here such as a PC USB keyboard, mouse, hard drive,
etc.
4.3.6 Ethernet
The Motherboard has two built-in Gigabit Ethernet connectors. The left one is identified as Eth0
and the right one is identified as Eth1.
DSV.OM.000391.DRM Page 20 of 68 Version 1.3
Doremi Labs