Doremi DSV-J2 - Manual (Page 50)

To access the BIOS settings of the DSV-J2 fitted with the SuperMicro X7SBE motherboard,
press the Delete key just after powering ON the keyboard when the SuperMicro load (splash)
screen appears, in order to enter into the BIOS configuration.
1. In Main tab, the Time and Date should be set to GMT time and date.
2. Check that the following is active:
Native Mode Operation [Serial ATA]
SATA RAID Enable [Disabled]
SATA AHCI Enable [Enabled]
SATA AHCI Legacy Enable [Disabled]
3. Go in Advanced menu, choose Boot Features and make sure that the following is set:
Only USB Port #6 cab boot [Enabled]
Power Loss Control [Last State]
4. Still within the Advanced menu, go to Hardware Monitor and make sure that the
following is set:
Fan Speed Control Mode [3-pin Server]
5. In the Boot menu:
Press the 3 key to load Doremi boot order. You should read:
Boot Priority Order:
1. USB HDD: xxxxName_of_the_Boot_Compact_Flashxxxxx
6. After Boot Priority is correctly set, press F10 and confirm by pressing <enter.>
The DSV-J2 will now continue the boot process with the new BIOS settings.
DSV.OM.000391.DRM Page 50 of 68 Version 1.3
Doremi Labs