Doremi DSV-J2 - Manual (Page 58)

15.2.6.1 Type Sub-Node
The available types of commands are listed below:
Table 1: Command Types Available
Type Description
Black Black video and silent audio signals will be generated by
the server
GPO A GPO will be sent by the server
Dowser The command concerns the projector dowser
Lamp The command concerns the projector lamp
Channel The command concerns the projector channel
Play The command will put the server in play mode
Pause The command will put the server in pause mode
TogglePlayPause The command will put the server in TogglePlayPause
mode
VideoOutputMode The command will set the video output mode
ProjectorMacro The command will specify a DLP projector macro
DeviceRawSendMes
sage The command will send a message to a device
PurgePendingMacro The command will purge pending macros
Note: In case the command type is Play, Pause, TogglePlayPause or PurgePendingMacro, no
additional parameters are required within the Command element.
15.2.6.2 Duration Sub-Node [optional]
The Duration element has only to be used for the Black command type. It specifies the duration,
as a number of seconds, of the associated black video and silent audio output.
15.2.6.3 Line Sub-Node [optional]
The Line element has only to be used for the “GPO” command type. It specifies the GPO line
number to be used for the associated command. It contains an integer to be chosen between 0
and 7.
15.2.6.4 Value Sub-Node [optional]
The Value element has only to be used for GPO, Dowser, Lamp, Channel, VideoOutputMode,
and ProjectorMacro command types.
When used for the GPO command, it has to be the Value element grouped with the Line and
optional PulseDelay elements sequence. When used for the Dowser, Lamp, Channel,
VideoOutputMode, or ProjectorMacro commands, it has to be the standalone Value element
defined at the same level as the Duration element in the schema (Figure 55).
DSV.OM.000391.DRM Page 58 of 68 Version 1.3
Doremi Labs