3 adding a barco projector – Doremi DSV-J2 User Manual
Page 40
Advertising
9.3 Adding a Barco Projector
To add a Barco projector, perform the same procedure as in paragraph 9.1 using Barco for the
Projector model field (Figure 48). No Vendor IP is needed.
Figure 48: Device Manager GUI – Barco Projector Setup Fields
Click the Save button to record these settings. You should be asked for a password.
DSV.OM.000391.DRM
Page 40 of 68
Version 1.3
Doremi Labs
Delete
button
Projector Identifier
DLP Head IP field
Projector model
set to Barco
Advertising