Doremi DSV-J2 - Manual (Page 37)

8 Time Zone Set Up
DSV-J2 units may or may not be localized with your time zone. This section provides you
information on how to check and/or change the time zone.
8.1 Checking the Time Zone
To confirm that the time zone of your DSV-J2 is set correctly, open a terminal window by going
to the Menu → System → Terminal menu of the DSV-J2. Then do the following:
type: date <enter>
The current time and time zone will be displayed
8.2 Changing the Time Zone
To change the time zone, follow the steps below:
type: su <enter>
Then type the root password in order to login as root - consult your system administrator
to know your root password or Doremi to know the default root password.
type: /sbin/rwdo tzsetup <enter>
Then follow the graphical wizard
type: reboot <enter>
After this point in the manual, the installation should be completed and you should be able to
use the DSV-J2 within your system. The information provided in the following sections is
provided for reference.
DSV.OM.000391.DRM Page 37 of 68 Version 1.3
Doremi Labs