Doremi DSV-J2 - Manual (Page 57)

15.2.5.2 Id Node
The Id element uniquely identifies the AutomationCueMacro for asset management purposes. It
is encoded as an urn:uuid per [RFC 4122].
15.2.5.3 AnnotationText Node [optional]
This AnnotationText element is a human-readable annotation corresponding to the comment
assigned to this Macro Cue when it was created. It is the name chosen by the user in 7.2.1 for
the field Comments.
15.2.5.4 CommandList Node
The CommandList element contains a list of zero, one or more Command elements. Each
Command element corresponds to the set of parameters describing one automation individual
command composing the Macro Automation Cue.
An empty CommandList can be used to generate an Automation Cue Macro executing no
command. It will just be used to maintain portability between theaters.
15.2.6Command Node [optional]
A Command node contains the parameters associated to a specific command to be used as
part of the overall AutomationCueMacro element. These parameters depend on the type of
command defined by the Type node below (Figure 55).
Figure 55: Command Structure
Note: Dotted lines denote optional elements that can be omitted during the creation based on
Macro Editor.
DSV.OM.000391.DRM Page 57 of 68 Version 1.3
Doremi Labs