BECKHOFF ET9300 - Manual (Page 55)

Application Note ET9300 53
Figure 12: EoE Example 2 (Schema)
Steps 1 to 3 are equal to EoE Example 1 (chapter 8.2.2.1).
4.) Enable IP Routing on the EtherCAT Master platform. The following steps depend on the
operating system.
a. Windows XP
i. Open the Advanced EtherCAT settings of the Master interface and select “IP
Enable Router”().
Figure 13: Enable IP Routing WinXP
b. Windows CE (CX platform)
i. Open CX Config uration Tool and enable “IP Routing”.