BECKHOFF ET9300 - Manual (Page 80)

78 Application Note ET9300
12.2 Main User Interface Elements
12.2.1 Tool Bar
12.2.1.1 File
The file menu (Figure 35: Configurator File Menu) contains the project file operations.
Figure 35: Configurator File Menu
[New]
Create a new slave project based on the local SSC files. The project can either be created on
the default configuration or a custom configuration (Figure 36: Create New Project). To import
third party configurations see 12.6.
Figure 36: Create New Project
[Open]
Open an existing project file.
[Save]
Save the actual settings to the current project file (if no project file was created before a file
browser dialog appears to create a new file).
[Save As]
Save the actual settings to a new project file.
[Exit]
Close current session.
12.2.1.2 Project
Figure 37: Configurator Project Menu