BECKHOFF ET9300 - Manual (Page 81)

Application Note ET9300 79
[Project Update]
Check for new Slave Stack Code version and update the current project. For further
information see chapter 12.5.
[Find Setting]
Open a dialog to find settings.
Figure 38: Find Setting Dialog
[Create new Slave Files]
Open a dialog to create new slave files depending on the actual settings.
12.2.1.3 Tool
Figure 39: Tool Menu
[Show Conflict Window]
Hide or show the conflict window.
[Options]
Open the options dialog (see Figure 40: Tool Options).
[EEPROM Programmer]
Open the EEPROM Programmer tool. This tool can be used to create an EEPROM header or
binary file or to program the EEPROM of EtherCAT slaves. For further details see
14.2EEPROM Programming.
[Application->Create new]
Creates a new Excel based application definition file. After Excel (or the corresponding *.xlsx
Editor is closed) the application will be applied to the slave project.
[Application->Import]
Imports a new slave application. The supported file types are described in chapter 13.