1 automatic network setup, Automatic network setup – BECKHOFF ET9300 User Manual
Page 68
Advertising
66
Application Note ET9300
Figure 25: Set device variable without PLC link
10.4.1 Automatic network setup
The TwinCAT System Manger provides a comfortable master setup.
a. TwinCAT 2: Open a new System Manager configuration and scan the network for new
devices (Figure 26).
Figure 26: Scan for new EtherCAT devices with TwinCAT 2
b. TwinCAT 3: Open the Visual Studio shell, create a new TwinCAT project and scan the
network for new devices (Figure 27).
Advertising