Bronkhorst EL-FLOW Prestige - Manual (Page 37)

Bronkhorst High-Tech B.V.
EL-FLOW Prestige 37 9.17.084
Pressure Inlet
Type Access Range FlowDDE FLOW-BUS Modbus
Float RW 0...3.4E+38 178 113/13 0xF168...0xF169/61801...61802
(Fixed) inlet pressure in bar(a), used for capacity calculations.
Fluid Temperature
Type Access Range FlowDDE FLOW-BUS Modbus
Float RW -250...500 181 113/16 0xF180...0xF181/61825...61826
(Fixed) temperature, used for capacity calculations.
Density
Type Access Range FlowDDE FLOW-BUS Modbus
Float RW 0...3.4E+38 170 33/21 0xA1A8...0xA1A9/41385...41386
Density for the selected fluidset in kg/m 3 . Read-only parameter.
Heat Capacity
Type Access Range FlowDDE FLOW-BUS Modbus
Float RW 0...3.4E+38 250 113/18 0xF190...0xF191/61841...61842
Heat capacity for the selected fluidset in J/kg·K. Read-only parameter.
Thermal Conductivity
Type Access Range FlowDDE FLOW-BUS Modbus
Float RW 0...3.4E+38 251 113/20 0xF1A0...0xF1A1/61857...61858
Thermal conductivity for the selected fluidset in W/m·K. Read-only parameter.
Viscosity
Type Access Range FlowDDE FLOW-BUS Modbus
Float RW 0...3.4E+38 252 113/21 0xF1A8...0xF1A9/61865...61866
Dynamic viscosity for the selected fluidset in Pa·s. Read-only parameter.
Mix Fraction Type
Type Access Range FlowDDE FLOW-BUS Modbus
Unsigned char RW 0...2 346 126/4 0x0FC4/4037
Set the fraction type for the mixture:
Value 0: Volume fraction
Value 1: Mass fraction
Value 2: Mole fraction
Mix Fraction Temperature
Type Access Range FlowDDE FLOW-BUS Modbus
Float RW -250...500 347 126/5 0xFE28...0xFE29/65065...65066
Temperature for the mixture specification in °C