Fluke Biomedical 956A-201-M2 - Manual (Page 79)

5-1
Section 5
TROUBLESHOOTING
5.1 TROUBLESHOOTING
Extreme care must be used when troubleshooting a system that
has power applied. All standard troubleshooting precautions
apply.
Once a problem has been located, remove all power before
continuing with the repair.
Personnel performing the troubleshooting/repair must be qualified
to ANSI 45.2.6, 1978, Skill Level II.
Personnel performing the following procedure must be familiar
with the operation of the monitoring system and the location of
each piece of equipment used in the system.
Improper setpoint entry can discontinue UDR operation. This
includes an invalid analog output low scale value, and analog
output high scale value resulting in the display of error Message
E0004 on the 956A-201-M2.
WARNING
WARNING
CAUTION
NOTE