Fluke Biomedical BP Pump 2 - Manual (Page 16)

BP Pump 2
Operators Manual
1-4
Tester pressure accuracy can be improved by upgrading to a high-accuracy
pressure transducer. This is a factory service upgrade and is provided to
customers wanting to meet the DIN EN 1060 requirements for pressure
measurement accuracy. For more information, refer to “Setup, Maintenance,
and Support: Maintenance and Support.”
General Safety Considerations
This Tester complies with safety and technical requirements described in the
following directives:
• UL 3101-1, Electrical Equipment for Laboratory Use; Part 1: General
Requirements.
• CAN/CSA C22.2 No. 1010.1 (1992), Safety Requirements for Electrical
Equipment for Measurement, Control and Laboratory Use, Part 1: General
Requirements.
• EC 73/23/EEC (Amended 93/68/EEC) EN61010-1:2001, Safety
requirement for electrical equipment for measurement, control and
laboratory use, Part 1: General Requirements.
Symbols
Table 1-1 describes symbols used in association with the Tester.
Table 1-1. Symbols
Symbol Description Symbol Description
W Risk of danger. Important
information. See manual. X Hazardous voltage. Risk
of electrical shock.
Œ
Intertek Electrical Test
Laboratory listed.
Conforms to relevant
Canadian and U.S.
standards.
P Conforms to European
Union directives
~
Do not dispose of this
product as unsorted
municipal waste. Contact
Fluke or a qualified
recycler for disposal.