Harken 1080 MKIII Jib Reefing & Furling - Manual (Page 7)

Parts
April 2000 Unit 3.25 MKIII 4
You should have at least two boxes: a long box with foils and a
rectangular box containing the drum and miscellaneous components.
You may also have a third box containing the headstay.
■
The foil box contains:
(10) 7' (2.13 m) Foil Extrusions. A standard kit has 10 foils, but one may have been pre-cut for use as your top foil. If
your headstay is longer than 74'10" (22.809 m) you should order one extra foil extrusion, Part 958. If your headstay is
over 81'10" (24.943 m) order two extras.
(1) 24" (610 mm) Special Bottom Foil Extrusion.
■
The main components box contains parts packaged on the display card plus a smaller parts box.
Main Components
Halyard Swivel
Emérillon de drisse
Fallwirbel
Girella Superiore
Drum Assembly
Ensemble Panier et
Chape Articulée
Trommeleinheit
Tamburo Completo
Torque Tube
Tube de Torsion
Mitnehmerhülse
Tubo di Torsione
Feeder
Engageur
Einfädler
Feeder