Harken 1080 MKIII Jib Reefing & Furling - Manual (Page 9)

Parts
April 2000 Unit 3.25 MKIII 5
1 Bag of 26 Connector Wedges, 4 Extra Wedges
1 Prefeeder
with line
1 Bag of 67 Foil Screws. Contains 7 extra screws
1 Bag of four Torque Tube Screws
1 Bag of Spare Screws. Contains one spare screw
for every application. They are not required for
installation
1 6 mm Allen Wrench
1 8 mm Allen Wrench
1 10 mm Allen Wrench
1 Locking Collar
1 Instant Adhesive
1 Loctite® (Blue)
1 Loctite® (Red)
1 Feeder with screw
These parts are placed on the headstay before assembly
and may be "missing" as the parts may have been placed
on your headstay in advance.
1 Top Foil Trim Cap
1 13" (330 mm) Bottom Connector
10 10" (254 mm) Regular Connectors
If your headstay is longer than 75'9" (23.089 m)
you will need one more connector - Order part 960
for -40 or 12.7 rod; 1032 for 9 /
16
" or 14 mm wire.
IMPORTANT
Note: headstay terminal is sold separately. Be
sure that you have ordered the correct size for
your boat.
Miscellaneous Parts
Rigger Components
Line is not included with furling unit. Purchase 7 /
16
" (12
mm) low stretch Dacron double braid. The length of the
line should be equal to the length of the boat plus the
length of the foot of the largest genoa plus 6' (2 m)
Furling Line
Foil Connector
Wedges
Prefeeder
Foil Screws
Torque Tube
Screws
Spare
Screws
Allen Wrenches
Locking
Collar
Instant
Adhesive
Blue Loctite®
Red Loctite®
Top Foil
Trim Cap
Bottom
Connector
Regular Connectors