Ivoclar Vivadent IPS e.max CAD Labside - Manual (Page 21)

21
S
ta
in
in
g
Te
ch
n
iq
u
e
Select the largest possible IPS e.max CAD Crystallization Pin IPS Object Fix Flow and IPS Object Fix Putty
Press the selected IPS e.max CAD Crystallization Pin deeply into the IPS Object Fix Putty or
Flow material
Fill the inside of the crown with IPS Object Fix Putty or Flow.
Clean off any possible residue adhering to the outer surface of the crown with a brush
dampened with water and dry
Smooth out displaced IPS Object Fix Putty or Flow with a plastic spatula from the margin
towards the spport pin so that the pin is secured in the paste and the crown wall is exactly
supported