Ivoclar Vivadent IPS e.max CAD Labside - Manual (Page 51)

51
L
a
y
e
ri
n
g
Te
ch
n
iq
u
e
1 st Dentin and Incisal firing
Perform the layering in accordance with the layering diagram (see IPS e.max Ceram Instructions for Use). Use the IPS e.max
Ceram Build-Up Liquids allround or soft to mix the layering materials. If a different consistency is desired, the liquids can
also be mixed in any ratio.
Contour the tooth shape with Dentin material Cut-back and build-up of the incisal area with incisal extension
Design the incisal third using Impulse materials Complete the layering procedure with Incisal and Transpa materials
Then the restoration is fired using the firing parameters for the 1st Dentin and Incisal firing
Firing parameters for the 1 st Dentin and Incisal firing
IPS e.max Ceram on IPS e.max CAD B S t
➚
T H V 1 V 2
Layering Technique [°C/°F] [min] [°C/°F/min] [°C/°F] [min] [°C/°F] [°C/°F]
1 st Dentin and Incisal firing 403/757 4:00 50/90 750/1382 1:00 450/842 749/1380