Ivoclar Vivadent IPS e.max CAD Labside - Manual (Page 48)

Check marginal areas and slightly finish, if necessary Completed IPS e.max MO framework
48
Veneering with IPS e.max Ceram
The following paragraphs will explain the most important veneering steps. For further
information on the nano-fluorapatite layering ceramic and its processing, please refer to
the IPS e.max Ceram Instructions for Use.
Firing tray and pins
Use a honey-combed firing tray (e.g. IPS ® UniTray) and the corresponding support pins to fire the
restorations (do not use IPS e.max CAD Crystallization Tray or IPS e.max CAD Crystallization Pins). Round
the top edges of the support pin to prevent the restoration from sticking to the pin. Another method of
reducing this risk is to cover the pins with platinum foil or a small amount of IPS Object Fix Putty or
Flow. Regularly clean the support pins. Do not use contaminated pins.