Ivoclar Vivadent IPS e.max CAD Labside User Manual
Page 65
Advertising
65
– The firing parameters listed represent standard values and apply to the Ivoclar Vivadent furnaces P200,
P300, P500, P700. For Ivoclar furnaces of an older generation, e.g. P20, P80, P90, P95, P100, PX1 and EP600
Combi, these temperatures are also valid as standard values. However, depending on the age of the heat-
ing muffle, the values may deviate by approximately ± 10 °C.
– If a non-Ivoclar Vivadent furnace is used, temperature corrections may be necessary.
– Regional differences in the power supply or the operation of several electronic devices by means of the
same circuit may render adjustments of the temperatures necessary.
Advertising