Leprecon LP-X24 Manual v3.2 - Manual (Page 136)

132 Chapter Six Creating Moving Light Labels
LP-X24 and LP-X48 Users Manual
4. If you haven't already done so, select the fixture(s) for the label that you want to
copy.
Reminder: The LP-X will permit you to copy a label for mixed fixture types only when
working with focus labels.
5. Press the Edit softkey.
The screen that is displayed will vary depending upon the number of attributes the
light has for the property. In the case of the Studio Color 250, there are four
attributes for the Color property: Color 1 function, Color mix Cyan, Color mix
Magenta and Color mix Yellow.
NoDws
cto: Studio Color 250
SaveAs Save
Color mix Cyan
0
Color mix Magen
0
Color mix Yell
40
You use the side wheel to scroll between the screens of attributes.
6. Press the SaveAs softkey.
By saving the label as a new label, you copy all of the attribute information from the
old label to the new label.
Label Name
Label Name:
Color_001
Please enter a name for the new label.
Yes / No
7. Enter a name for the new label.
8. Press the Yes key to confirm the operation. Press No/Esc to cancel the operation.