Leprecon LP-X24 Manual v3.2 - Manual (Page 95)

Moving Light Programming Chapter Four 91
LP-X24 and LP-X48 Users Manual
Label
Recording new scene
ColrFx Beam Attrib Focus
No instruments selected.
Delay
0:00.0 Fade
0:00.0
100%
Dowse
Intensity:
Label
Recording new scene
ColrFx Beam Attrib Focus
No instruments selected.
Delay
0:00.0 Fade
0:00.0
100%
No Dowse
Intensity:
Recording Moving Light Looks
You record a look or a series of looks a scene listto a playback. On the LP-X24,
there are six playbacks and twenty pages for each, so you may record up to 120 scene
lists. On the LP-X48, there are twelve playbacks with twenty pages for each, so you may
record up to 240 scene lists.
To Record a Look with one Moving Light
1. Put the LP-X into the following modes for moving light recording:
Button/Fader Setting
Modes Record and Scene
Display ML
Filter ML
or BOTH
Bump Any setting
Master Fader Up (typically full on)
Manual Fader Any setting