Leprecon LP-X24 Manual v3.2 - Manual (Page 79)

Conventional Light Programming Chapter Three 75
LP-X24 and LP-X48 Users Manual
Record: PG 1 PB 6 Step: 1
Save
Select
Level
Fade
0:00
50
01 02 03 04 05 06 07 08 09 10 11 12
13 14 15 16 17 18 19 20 21 22 23 24
FF
5. To add another look to the playback, use the Manual Scene faders to create the look
and then press the Select button for the same page and playback.
Record: PG 1 PB 6 Step: 2
Save
Select
Level
Fade
0:00
81
01 02 03 04 05 06 07 08 09 10 11 12
13 14 15 16 17 18 19 20 21 22 23 24
17
FF 50 50 50 FF
6. Repeat Step 5 until you have recorded all desired looks.
To Play Back Conventional Light Looks
1. Start by ensuring that all buttons and faders are in the proper positions.
Button/Fader Setting
Modes Run and Playback or Scene
Display
N/A
Filter N/A
Bump Any setting
Master Fader Up (typically full on)
Manual Fader Any setting
Programmer Fader Down
2. Raise the playback to the desired level (typically 100%).
Page 1, Playback 6, Step 1