Leprecon LP-X24 Manual v3.2 - Manual (Page 70)

66 Chapter Two Setup Essentials
LP-X24 and LP-X48 Users Manual
Transferring a Show from an LP-X48 to an LP-X24
There are very few issues that you will have to address if you need to transfer a show
from an LP-X48 to an LP-X24.
The LP-X24 will not delete any information. It ignores information above channel 96 and
on DMX Line B.
If you want to, you may re-patch conventional lights and re-assign moving lights to slots
recognized by the LP-X24.
The Erase Menu
Use the Erase menu to erase any of the following:
Softkey Function
Stack Erasing the stack will discard all information for the
stack. It will not discard information stored in linked
playbacks. For more information about linked
playbacks, see "Linking to a Playback" beginning on
page166.
Patch Deletes all custom patches.
Playback Erasing playbacks removes all looks from all
playbacks.
Show Erasing the show clears all information from the LP-X
and restores it to factory presets. This is the same as
creating a new show.
NOTE: There is no way to recover information after erasing.
To Erase the Stack
1. From the Setup Mode screen, use the side wheel to scroll to the second menu.
2. Press the Erase softkey.
The Erase screen appears.