Leprecon LP-X24 Manual v3.2 - Manual (Page 17)

Introduction 13
LP-X24 and LP-X48 Users Manual
There are two ways to switch to LCD Mode:
(1) Press the first softkey on the console. The softkey is labeled LCD Mode.
(2) From the Setup screen, click or press the LCD Mode button in the lower right
corner.
Orientation to LCD Mode
The LCD display has several sections to it.
Across the top are the menus. You make menu selections by pressing the button or
"softkey" above the menu item of your choice. The display shown below has menu items
for Color, Beam, Focus, Attributes and Labels. The fifth slot is empty.
Label
Recording new scene
ColrFx
Defaults
Beam Attrib Focus
No Change
amber
blue
congo blue
cto
Delay
0:00.0 Fade
0:00.0
100%
No Dowse
Intensity:
One or more of the wheels will assist you in utilizing the functions and features on the
display. In this case, all four wheels are useful: