Leprecon LP-X24 Manual v3.2 - Manual (Page 42)

38 Chapter One Quick Start
LP-X24 and LP-X48 Users Manual
• When a light is selected, it starts with all labels set to No Change rather than the
current values for the lights or the default values for the light. This enables you to
change only the properties you want.
• Timing and No Dowse are not available.
(1) In Run Playback mode, click or press the Live Override menu item.
The ML or Conventional Programmer appears, depending upon which was the last
selected. You may toggle between these two programmers using the Conventional
Programmer and Moving Light Programmer menu items.