Leprecon LP-X24 Manual v3.2 - Manual (Page 211)

Other Setup Features Chapter Twelve 207
LP-X24 and LP-X48 Users Manual
11. When you are ready, press the Save softkey.
Add Edit Delete
MY DEVICE
1 Pan F
12. To assign another attribute to the device, press the Add softkey and repeat steps 9
through 11.
To Edit a Moving Light Device
Editing devices (especially devices that are included in the LP-X library) may have
undesired consequences. For example, if you edit an attribute to restrict the range, any
values outside that range will not be downloaded. This can break labels.
1. From the Setup Mode screen, press the Device softkey.
The Device List screen appears.
2. Use the side wheel or the Plus (+) and Minus (-) buttons to select a device to edit.
3. Press the Edit softkey.
Add Edit Delete
MiniMac Profile
1 Shutter B
3 Gobo wheel 1 B
4 Gobo Rotate B
2 Color wheel 1 C
1 Dimmer I
5 Pan F
4. To add an attribute to the moving light device, press the Add softkey.
Then follow steps 9 through 11 from the procedure given in the section "To Create a
New Moving Light Device" beginning on page 204.
5. To edit an attribute of the moving light device, select the attribute and press the Edit
softkey.