Marantz AV7702 Owner Manual - Manual (Page 189)

o HDMI Audio Out
Select HDMI audio output device.
AVP
(Default):
Play back through speakers connected to
power amp. (Audio is output from the
PRE OUT connector on this unit.)
TV:
Play back through TV connected to the
unit.
0 When the HDMI control function is activated, priority is given to the TV audio
setting. (“HDMI control function” (v p. 151))
0 When the power of this unit is on and “HDMI Audio Out” is set to “TV”, audio is
output as 2-channel from the HDMI OUT connector.
o Video Output
Select the HDMI monitor connector to be used.
Auto(Dual)
(Default):
The presence of a TV connected to the
HDMI MONITOR 1 or HDMI MONITOR 2
connector is detected automatically, and
that TV connection is used.
Monitor 1:
A TV connected to the HDMI MONITOR
1 connector is always used.
Monitor 2:
A TV connected to the HDMI MONITOR
2 connector is always used.
0 If both the HDMI MONITOR1 and HDMI MONITOR2 connectors are
connected and “Resolution” is set to “Auto”, the signals are output with a
resolution that is compatible with both TVs. When “Resolution” is not set to
“Auto”, video may not be output. In this case, set a resolution that is
compatible with both TVs. (v p. 194)
You can check which resolutions are compatible with your TV in “HDMI
Monitor 1” and “HDMI Monitor 2”. (v p. 247)
0 This can be set by pressing HDMI OUT on the main unit.
Contents Connections Playback Settings Tips Appendix
189 Front panel Display Rear panel Remote Index