Marantz AV7702 Owner Manual - Manual (Page 27)

Remote control unit
.
q
e
w
r
t
y
q w e
A Display
A LEARN indicator
This is lit when setting the learning function for the remote control unit.
(v p. 260)
B Information display
0
This displays “AVP” when operating this unit.
0
This displays the input source name when operating an external
device.
0
This displays “TV” when operating TV.
C l indicator
This is lit when signals are sent from the remote control unit.
B AVP operation button
When preset codes are registered to the remote control unit, press this
button and then operate the menu on the unit.
C SET button
This is used for various settings on the remote control unit.
(v p. 252, 260, 263, 264)
D ZONE SELECT button
These switch the zone (MAIN ZONE, ZONE2, ZONE3) that is operated
through the remote control unit. (v p. 166, 171)
E
Device operation buttons (DEVICE X / DEVICE MENU)
These turn the power of external devices on/off and call up menus.
Preset codes need to be registered in order to use these buttons.
(v p. 253)
F Input source select buttons
These select the input source. (v p. 74, 166)
Contents Connections Playback Settings Tips Appendix
27 Front panel Display Rear panel Remote Index