V p. 194), O resolution – Marantz AV7702 Owner Manual User Manual

Page 194

Advertising
background image

n When the input source is set to “iPod/USB” and

“Online Music”

On

(Default):

Use i/p scaler function.

Off:

Do not use i/p scaler function.

0 “Analog & HDMI” can be set for input sources for which an HDMI input

connector is assigned.

0 Which items can be set depend on the input source assigned to each input

connector.

0 This function is not effective when the input signal is “x.v.Color”, 3D, sYCC601

color, Adobe RGB color, Adobe YCC601 color or computer resolutions.

o Resolution

Set the output resolution. You can set “Resolution” separately for

HDMI output of the analog video input and HDMI input.

Auto

(Default):

The resolution supported by the TV

connected to the HDMI MONITOR OUT

connector is detected automatically and

the appropriate output resolution is set.

480p/576p / 1080i /

720p / 1080p:24Hz / 4K /

4K(60/50) :

Set the output resolution.

0 When “i/p Scaler” is set to “Analog & HDMI”, the resolution of both the analog

video input signal and HDMI input signal can be set. (v p. 193)

0 When set to “1080p:24Hz”, you can enjoy film-like pictures for film sources (in

24 Hz). For video sources and mixed sources, we recommend setting the

resolution to “1080p”.

0 It is not possible to convert a 50 Hz signal into 1080p/24Hz. It is output at a

resolution of 1080p/50Hz.

Contents

Connections

Playback

Settings

Tips

Appendix

194

Front panel

Display

Rear panel

Remote

Index

Advertising
This manual is related to the following products: