N stopping audyssey, Setup – Marantz AV7702 Owner Manual User Manual

Page 208

Advertising
background image

8

Move the Sound calibration microphone to position 2,

select “Continue”, then press ENTER.

The measurement of the second position starts.
Measurements can be made in up to eight positions.

.

Complete

Continue

Place the microphone ear level at the 2nd listening position,
which should be no more than 2 ft (60cm) away from the 1st
position, then select “Continue”...

Back

Ear Height

Audyssey Setup

To skip measuring the second and subsequent listening position, press o to

select “Complete” and press ENTER to proceed to step 11.

n Stopping Audyssey

®

Setup

A Press BACK to display the popup screen.
B

Press o to select “Yes”, then press ENTER.

9

Repeat step 8, measuring positions 3 to 8.

10

Select “Continue”, then press ENTER.

.

Audyssey Setup

Continue

Repeat Last Test

Measurements complete.
Select Continue to analyze the data...

Start the analysis and storage of the measurement results.

0

Analysis takes several minutes to complete.

The more speakers and measurement positions that there are,

the more time it takes to perform the analysis.

NOTE

When the measurement results are being saved, make sure the power is not

turned off.

Contents

Connections

Playback

Settings

Tips

Appendix

208

Front panel

Display

Rear panel

Remote

Index

Advertising
This manual is related to the following products: