When “hdmi pass through” is set to “on” (v p. 190), When “hdmi control” is set to “on” (v p. 190), Set “hdmi control” to “on”. (v p. 190) – Marantz AV7702 Owner Manual User Manual
Page 190: O hdmi pass through, O hdmi control
o HDMI Pass Through
Selects how this unit will transmit HDMI signals to the HDMI output in
standby power mode.
On
(Default):
Transmits the selected HDMI input
through the AV receiver’s HDMI output
when this unit is in standby power mode.
Off:
No HDMI signals are transmitted through
this unit’s HDMI output in standby power
mode.
o HDMI Control
You can link operations with devices connected to HDMI and
compatible with HDMI Control.
On:
Use HDMI control function.
Off
(Default):
Do not use HDMI control function.
0 Please consult the operating instructions for each connected device to check
the settings.
0 Refer to “HDMI control function” for more information about the HDMI control
function. (v p. 151)
NOTE
If the “HDMI Control” settings have been changed, always reset the power to
connected devices after the change.
190