Marantz AV7702 Owner Manual - Manual (Page 200)

o HDMI
Set this to change the HDMI input connectors assigned to the input
sources.
1 / 2 / 3 / 4 / 5 / 6 /
7 / Front:
Assign an HDMI input connector to the selected
input source.
– :
Do not assign an HDMI input connector to the
selected input source.
When “HDMI Control” is set to “On” in the menu, “HDMI” cannot be assigned to
“TV Audio”. (v p. 190)
o DIGITAL
Set this to change the digital audio input connectors assigned to the
input sources.
COAX1 (Coaxial) /
COAX2 /
OPT1 (Optical) /
OPT2:
Assign a digital audio input connector to the
selected input source.
– :
Do not assign a digital audio input connector
to the selected input source.
o ANALOG
Set this to change the analog audio input connectors assigned to the
input sources.
1 / 2 / 3 / 4 / 5 /
Front:
Assign a analog audio input connector to the
selected input source.
– :
Do not assign a analog audio input connector to
the selected input source.
o
COMP (Component video)
Set this to change the component video input connectors assigned to
the input sources.
1 / 2 / 3: Assign the component video input connector to the selected
input source.
– :
Do not assign a component video input connector to the
selected input source.
o VIDEO
Set this to change the composite video input connectors assigned to
the input sources.
1 / 2 / 3 / Front: Assign the video input connector to the selected
input source.
– :
Do not assign a video input connector to the
selected input source.
o Set Defaults
The “Input Assign” settings are returned to the default settings.
Contents Connections Playback Settings Tips Appendix
200 Front panel Display Rear panel Remote Index