Marantz AV7702 Owner Manual - Manual (Page 217)

GWhen “Height Speakers” is set to “Using Dolby Speakers”H
Select the height channels used for the two pair.
AUDIO OUT connectors
Select items
HEIGHT1 HEIGHT2
Front Dolby
(Default)
Front Dolby Not assigned.
Surround Dolby Surround Dolby Not assigned.
Back Dolby Back Dolby Not assigned.
Front Dolby & Top Rear Front Dolby Top Rear
Front Dolby & Rear Height Front Dolby Rear Height
Front Height & Surr. Dolby Front Height Surround Dolby
Front Height & Back Dolby Front Height Back Dolby
Top Front & Surr. Dolby Top Front Surround Dolby
Top Front & Back Dolby Top Front Back Dolby
Front Dolby & Surr. Dolby Front Dolby Surround Dolby
Front Dolby & Back Dolby Front Dolby Back Dolby
n Wide/Height2
Select the channel that is output from the FRONT WIDE/HEIGHT2
BALANCED XLR PRE OUT connectors.
Front Wide
(Default):
Outputs the front wide channel from the FRONT WIDE/
HEIGHT2 BALANCED XLR PRE OUT connectors.
Top Rear z :
Outputs the channel assigned for HEIGHT2 from the
FRONT WIDE/HEIGHT2 BALANCED XLR PRE OUT
connectors.
For the front wide channel, use the UNBALANCED RCA
PRE OUT connectors.
z The displayed selection shows the channel name assigned for HEIGHT2 in the
“Height Layout” setting.
In some settings, “Wide/Height2” may not be available.
Contents Connections Playback Settings Tips Appendix
217 Front panel Display Rear panel Remote Index