Marantz AV7702 Owner Manual - Manual (Page 277)

o The menu screen is not displayed on the TV
Symptom Cause / Solution Page
The menu screen or status
information screen is not
displayed on the TV.
0
The menu screen is only displayed on this unit and a TV connected with an HDMI cable. If this unit is
connected to a TV using a different video output connector, operate while watching the display on this
unit.
－
0
The status information will not appear on the TV when the following video signals are being played.
- Some images of 3D video content
- Computer resolution images (example: VGA)
- Video with an aspect ratio other than 16:9 or 4:3
138
0
When a 2D video is converted to a 3D video on the TV, the menu screen or status information screen is
not displayed properly.
138
0
In the pure direct playback mode, the menu screen or status information is not displayed. Switch to a
sound mode other than the pure direct mode.
138
0
Set the “TV Format” setting in the menu to a selection that is appropriate for the TV. 198
Contents Connections Playback Settings Tips Appendix
277 Front panel Display Rear panel Remote Index