Listening to an hd radio broadcast, These enter numbers into the unit. (v p. 91) – Marantz AV7702 Owner Manual User Manual
Page 91
Listening to an HD Radio broadcast
1
Connect the antenna. “Connecting an HD Radio
2
Press TUNER to switch the input source to “HD Radio”.
G TV screen H
.
TUNE+/-
TUNE+/-
STEREO HD-AUTO
CH /
CH /
OPTION
OPTION
HD Radio
CH 1
FM 92.10MHz
Now Playing
Tune
Preset
Option
G Display of this unit H
.
3
Press OPTION.
The option menu screen is displayed.
4
Use ui to select “FM/AM”, then press ENTER.
This displays the reception band input screen.
5
Use o p to select “FM” or “AM”, then press ENTER.
FM:
When listening to an FM broadcast.
AM:
When listening to an AM broadcast.
6
Press TUNE + or TUNE - to select the station you want
listen to.
Scanning is performed until it finds an available radio station. When
it finds a radio station, it stops the scan automatically and tunes in.
The modes for receiving FM broadcasts consists of “Auto” mode that automatically
searches available broadcast stations and “Manual” mode that lets you tune in using
buttons to change the frequency. The default setting is “Auto”. You can also use
“Direct Tune” to tune in by entering the frequency directly.
In “Auto” mode, you cannot tune in to radio stations if the reception is not good.
If this is the case, then use the “Manual” mode or “Direct Tune” mode to tune in.
Operation buttons
Function
TUNE +, –
Selects the radio station (up/down)
CH/PAGE d f
Selects preset radio stations
0 – 9
Preset channel selection /
Direct frequency tuning
91