General, Language, Zone2 setup / zone3 setup – Marantz AV7702 Owner Manual User Manual
Page 242: V p. 242), O bass, O treble, O high pass filter
General
Make various other settings.
Language
Set the language for display the menu on the TV screen.
English / Français / Español (Default : English)
“Language” can also be set up by the following operation. However, the menu screen
is not displayed. Watch the display while configuring the settings.
1.
Press and hold the main unit’s STATUS and ZONE SELECT at the
same time for at least 3 seconds.
“Video Format <NTSC>” appears on the display.
2.
Press the main unit’s i.
“GUI Language ENGLISH” appears on the display.
3.
Use the main unit’s o or p and set the language.
4.
Press the main unit’s ENTER to complete the setting.
ZONE2 Setup / ZONE3 Setup
Makes settings for audio playback with ZONE2 and ZONE3.
Values set for “Volume Limit” and “Power On Volume” are displayed according to the
setting specified for the volume “Scale”. (v p. 179)
o Bass
Adjust bass.
-10 dB – +10 dB (Default : 0 dB)
o Treble
Adjust treble.
-10 dB – +10 dB (Default : 0 dB)
o High Pass Filter
Make settings for cutting the low range to reduce distortion in the bass.
On:
The low range is attenuated.
Off
(Default):
The low range is not attenuated.
242