Dc out jacks, V p. 71) – Marantz AV7702 Owner Manual User Manual
Page 71
Advertising
DC OUT jacks
When a device with DC IN jack is connected, the connected device’s power on/standby can be controlled through linked operation to this unit.
The DC OUT jack outputs a maximum 12 V DC /150 mA electrical signal.
.
12 V DC/150 mA trigger-compatible device
NOTE
0 Use a monaural mini-plug cable for connecting the DC OUT jack. Do not use a stereo mini-plug cable.
0 If the permissible trigger input level for the connected device is larger than 12 V DC/150 mA, or has shorted, the DC OUT jack cannot be used. In this case, turn off the power
to the unit, and disconnect DC OUT jack.
71
Advertising
This manual is related to the following products: