V p. 206), Channel select”. (v p. 206) – Marantz AV7702 Owner Manual User Manual

Page 206

Advertising
background image

3

Connect the Sound calibration microphone to the

SETUP MIC jack of this unit.

.

When the Sound calibration microphone is

connected, the following screen is displayed.

.

Audyssey Setup

Channel Select

Amp Assign

Check Results

Restore...

Start

Your AV preamp can automatically measure the acoustics of
your room then optimize your speakers using the included
microphone and microphone stand.
Set the following items
if necessary.

4

Select “Start”, then press ENTER.

Audyssey

®

Setup can also make the following settings.

0

Amp Assign

The signals output from the SURROUND BACK, FRONT WIDE/

HEIGHT2 and HEIGHT1 PRE OUT connectors can be switched

in accordance with your speaker environment. (Amp

Assign (v p. 214))

0

Channel Select

If channels that are not to be used are set in advance,

measurement for the set channels is skipped, and measuring

time can be reduced. You can also change the number of

surround back speakers and subwoofer.

5

Follow the instructions on the screen display and press

“Next” to proceed further.

Contents

Connections

Playback

Settings

Tips

Appendix

206

Front panel

Display

Rear panel

Remote

Index

Advertising
This manual is related to the following products: