Marantz AV7702 Owner Manual - Manual (Page 214)

Manual Setup
Perform when setting the speakers manually or when changing settings
made in Audyssey
® Setup.
0 If you change the speaker settings after performing Audyssey ® Setup,
you will no longer be able to select Audyssey MultEQ ® XT32, Audyssey
Dynamic EQ ® or Audyssey Dynamic Volume ® . (v p. 180 - 181)
0
This unit can be used without changing “Manual Setup” settings. Please
set if necessary.
Amp Assign
You can change the Pre Amplifier assignment according to your speaker
system.
o Assign Mode
Select how to use the Pre Amplifier.
You need to configure the detailed settings for the speaker
configuration in accordance with the selected mode. Select Assign
Mode configure the corresponding detailed settings.
11.1ch
(Default):
0
All Pre Amplifiers for this unit are used for MAIN ZONE.
0
Up to 13.1-channels can be connected for MAIN ZONE.
The speakers play back up to 11.1-channels in
accordance with the input signal and sound mode.
(v p. 215)
9.1ch (Bi-
Amp):
0
The Pre Amplifier of this unit is assigned to 2-channels
for creating bi-amp connections with the front speaker.
0
Up to 11.1-channels can be connected for MAIN ZONE.
The speakers play back up to 9.1-channels in
accordance with the input signal and sound mode.
(v p. 218)
Contents Connections Playback Settings Tips Appendix
214 Front panel Display Rear panel Remote Index