Marantz AV7702 Owner Manual - Manual (Page 93)

Tuning in by entering the frequency
(Direct Tune)
You can enter the receiving frequency directly to tune in.
1
Press OPTION when the input source is “HD Radio”.
The option menu screen is displayed.
2
Use ui to select “Direct Tune”, then press ENTER.
The screen that lets you enter the frequency is displayed.
3
Use ui or 0 – 9 to select a number and press p.
0
If o is pressed, the immediately preceding input is cancelled.
4
Repeat step 3 and enter the frequency of the radio
station you want to hear.
5
When setting is completed, press ENTER.
The preset frequency is tuned in.
Changing the tune mode (Tune Mode)
You can change the mode for tuning into FM and AM broadcasts. If you
cannot tune in automatically with “Auto” mode, change the mode to
“Manual” and tune in manually.
1
Press OPTION when the input source is “HD Radio”.
The option menu screen is displayed.
2
Use ui to select “Tune Mode”, then press ENTER.
3
Use o p to select the tune mode, then press ENTER.
Auto:
Automatically search for and tune to a receivable
radio station.
HD-Auto : Automatically tune to the HD Radio station.
Analog-Auto : Automatically tune to an analog station and analog
HD Radio station.
Manual:
Manually change the frequency one step at a time
each time the button is pressed.
Analog-
Manual :
Manually tune to an analog station and analog HD
Radio station.
Contents Connections Playback Settings Tips Appendix
93 Front panel Display Rear panel Remote Index