NavCom SurveCE Integration Rev.A - Manual (Page 101)

SurvCE ™ Integration User Guide – Rev. A
3-99
A minimum of 4 points are needed to define the
boundary area.
The localization should be enacted on the closest
geodetic projection and geoidal model from the Job
Settings > System tab.
1. Select Equip > Localization to apply a best fit
transformation using a localization. The
localization submenu has two options (see Figure
58).

Localization in the context of SurvCE is
a method to relate the coordinates of a
survey that are based initially on a
StarFire position or a GPS navigation
solution, referred to here as an RTK
Solution.

The GPS navigation solution may be
within 10 feet on WGS84 and the
StarFire™ position may be within 0.3
feet after 30-45 minutes period. As a
field survey progresses, points with
known grid coordinate positions may be
included in the survey requiring the
application of a transformation to work in
the local system.